How to prevent scaling in the water pump when using an Air Cooler Water Pump?

Water pump scaling is a major hidden danger affecting the efficiency of the cooling system. Cixi Xinhao Motor Co., Ltd. uses corrosion-resistant materials in its pump body design and provides targeted maintenance suggestions.

1. Water Treatment Measures

High-hardness water is the root cause of scaling. Xinhao Motor recommends that users install a water softening device at the pump inlet. This device uses ion exchange resin to replace calcium and magnesium ions with sodium ions, thereby reducing water hardness and the likelihood of scale formation.

2. Regularly Add Descaling Agents

During pump operation, adding an appropriate amount of descaling agent (such as citric acid, formic acid, etc.) can change the balance of ions in the water and effectively inhibit scale deposition.

3. Install Filtration and Bypass Devices

Xinhao Motor has considered the connection of bypass equipment in its pump body design. Filters remove dust and impurities carried in by the air, reducing the accumulation of dirt inside the water pump.

4. Reasonably Control Operating Parameters

When the Air Cooler Water Pump is running, it is recommended to avoid prolonged high-temperature operation and control the appropriate flow rate. Too low a flow rate can lead to water stagnation and easy scaling; too high a flow rate may cause pump body wear.